Cixi Wangtong Electronic Co.,Ltd. is DIP Switch Manufacture,and the DIP switch is RoHS Compliant.
DIP Switches and Connector :DIP Switches,Keyswitches,Toggle Switches,Thumbwheel switches, Rotary Switches,SMT Switches,Select Switch,Coding Switch,Coded Selector,Dial Switch,Combination Switch,Digital Switches,Breaker,rotary dial switch,Piano-key Switches,Socket,plugs.
DIP SWITCHES SPECIFICATION
CONFIGURATION MATERIALS COLOR
BASE ULFV-0，PBT Black
COVER ULFV-0，PBT (DS,DP ,DA)Red or Blue(DI ,SMT )Black
BUTTON ULFV-0，PBT White
TERMINAL Phosphor bronze Gold plating /
ITEM PARAMETER
Operation Force 800g Max
Stroke DS,DP,DA series 2.00 mm
DI &SMT series 0.90 mm
Operation Temp -20°C～＋70°C
Storage Temp -40°C～＋85°C
Electrical Life 2000 operations cycles per switch 24 VDC, 25mA
Non-Switching Rating 100mA, 50VDC
Switching rating 25mA, 24VDC
Contact resistance (a) 50 m? max. at initial(b)100m? max. after life test
Insulation Resistance 100M? Min, 500VDC
Dielectric Strength 500VAC／1 minute
Capacitance 5pF max.
Circuit Single pole single throw
SOLDERING AND CLEANING PROCESSES
1、Keep all switch contacts in their �OFF� position
for all operations
2、WAVW SOLDERING : Recommended Solder Temperature
at 500 °F(260°C) max. 5 seconds
3、HAND SOLDERING : Use a soldering iron of 30 watts,
controlled at 608°F (320 °C) approximately 2 seconds
while applying solder
4、CLEANING PROCESS : Flux clean using force rinse,
high agitation or triple bath cleaning method.
Freon TF or TE give excellent results. When vapor methods are used do
not subject the
switch to solvents at temperature above 125°F (51°C)
5.packing:All DIP Switches are shipped in standard IC tubes with all
poles in the "OFF" position.